B038 - 2024-10-02
1 - Is backward compatible with B037 configuration. 
2 - allows for the camera location to be set as “Right Front” on Left hand drive vehicles. On previous versions we had to choose “Left Front” and then invert the indicator connections. This connection inversion is now not required. Use the B037 & B038 Config file, and then change the following for Left Hand drive vehicles, in “Configuration/Trigger input”
3 - Left turn = disabled, source = Left turn
- Right turn = enabled, source = Right turn
- Mute = enabled, source = Left turn
- Special brake = enabled, source = Right turn
- internal speaker = enabled, source = Left turn


------------------------------------------------------------------
B037 - 2024-09-04
1 - If the handbrake is on and a camera fails or is dirty, the driver will be informed via the monitor with Camera Block. Previously, with the handbrake on MOIS took precedence and displayed a split-screen. Now it shows the Camera Block message on the channel that the camera has failed / is dirty on.
2 - Maintains the system on for a time after the ignition is switched off. Set for 2 minutes (120s) but can be altered in Power settings by altering both AI Detection and System Sleep Delay values but they must both have the same value ( In seconds) enter for both options. The MCU value must NEVER be altered.
3 - Stops the continuous beeping should someone be in the red zone. Can be set for continuous (0s as before), 5s intervals repeated (default), and 10s intervals repeated.
4 - Increases the length of the Alert Videos saved to 10 seconds. They were 5 second videos before.

------------------------------------------------------------------
B036 - 2024-05-21
1 - Fixed rare GPS lost position bug
2 - Improved AI model to reduce cone/bollard false detection

------------------------------------------------------------------
B034 - 2024-04-18
1 - Added dirty/blocked camera detection and warning