From the first step of checking compatibility, to creating your unique PIN, here's what you can expect when having a Ghost immobiliser fitted.
How Is a Ghost Immobiliser Installed?
The Ghost integrates with your vehicle's CAN bus, the internal communication network used by different electronic components within the car.
Rather than relying on an external key fob or transmitting a radio frequency signal, the system communicates through the vehicle's existing electronics.
The installation is deliberately discreet, with no obvious external components showing where the system is located. This hidden installation is an important part of the Ghost's security and where it gets its name from.
What Happens During a Ghost Immobiliser Installation?
1. Vehicle Compatibility Is Checked
Before installation, your vehicle's make, model and year should be checked to confirm that it is compatible with the Ghost Immobiliser.
2. The Ghost Is Installed
The installer integrates the Ghost discreetly with the vehicle's electronic network.
There is no additional keypad or obvious security device left on display inside the vehicle. This is the most important part and varies between vehicles, expect from 2 hours to 6 hours.
3. Your PIN Sequence Is Set Up
Your Ghost device uses buttons already fitted to your vehicle to create a unique PIN sequence. Depending on the vehicle, this may include compatible buttons on the steering wheel, centre console or other controls.
4. The System Is Tested
Once installed, the system is tested by the installer to make sure the vehicle cannot be driven without the correct authentication.
5. You're Shown How to Use It
Your installer will explain how to enter your PIN, change your PIN, use the emergency code, and use the service mode feature. This step is crucial to a smooth experience with the Ghost Immobiliser.
Where Is a Ghost Immobiliser Fitted?
That's deliberately difficult to answer, and that's the point!
A key advantage of the Ghost is that it is discreetly integrated into the vehicle rather than installed as an obvious standalone security device.
There is no visible keypad and no separate key fob that identifies the system. This makes it significantly harder for a thief to identify and target the security device.
Does Installing a Ghost Immobiliser Modify My Car?
Ghost works through the vehicle's existing electronic communication network. Using the vehicles factory communications to not allow it to drive with entering the PIN code. No permanent programming or modification is done to the vehicle.
Because every make and model is different, installation requirements vary, which is one of the reasons professional fitting is important.
An experienced installer will understand how the system should be integrated with your vehicle make and model.
Should the Ghost be removed from the vehicle, there will be no trace of it ever being installed.
Can I Install a Ghost Immobiliser Myself?
Ghost installation isn't comparable to fitting a physical steering lock or plugging in a dash camera, so no, you shouldn’t try installing a Ghost Immobiliser yourself.
The system integrates directly with the vehicle's electronics so should be professionally installed. Attempting a DIY installation risks incorrect operation and could interfere with the vehicle's systems.
How Long Does Ghost Immobiliser Installation Take?
Installation time can vary according to your cars’ make, model, and vehicle electronics. Some smaller sports cars or more luxury vehicles can be difficult to work on.
Your installer should be able to give you an estimated installation time when you book. Expect anywhere from 2 hours to 6 hours.
What Happens After Installation?
Once the Ghost is fitted, using it becomes part of your normal driving routine.
Before driving, you authenticate yourself using your chosen PIN sequence through the vehicle's existing buttons.
Without the correct sequence, the Ghost prevents the car from moving.
There is no additional key fob to carry and no obvious indication to a potential thief that the system is fitted.
How Do I Find a Ghost Immobiliser Installer?
Start by checking whether your vehicle is compatible with the Ghost Immobiliser.
You can then contact us, and we will assist you in finding an approved local installer.
Check your vehicle's compatibility
FAQs
How long does it take to install a Ghost immobiliser?
Installation time varies depending on the vehicle and the Ghost product required. Your installer can provide an estimate when you book.
Where is a Ghost immobiliser installed?
The system is discreetly integrated into the vehicle. Its installation is intentionally hidden so that potential thieves cannot easily identify or target it.
Can I install a Ghost immobiliser myself?
Ghost integrates with your vehicle's electronics, so professional installation is recommended.
Will I have an extra key fob after installation?
No. Ghost does not rely on an additional key fob. Authentication uses a PIN sequence entered through compatible existing vehicle controls.
What should I do before booking installation?
Check that your exact vehicle make, model and year are compatible and identify which Ghost product is suitable.
Thinking about protecting your vehicle? Explore the Autowatch Ghost range or contact us for an approved local installer.