System Operation

The AACDS turns on when the ignition is turned on. When the vehicle slows to below 10 Mph, the system is activated. There is NO audible tone. The GREEN display light flashes once to indicate that the system is ACTIVE.

Whilst activated and the vehicle approaches within 600mm of an obstacle, the GREEN display light will illuminate with NO AUDIO to how close the object is.

Whilst activated and the vehicle approaches within 450mm of an obstacle, the AMBER display light will illuminate with NO AUDIO to how close the object is.

Whilst activated and the vehicle approaches within 300mm of an obstacle, the buzzer/display will give a CONSTANT audible tone and will illuminate the RED, AMBER and GREEN display light to indicate that the object is close enough to cause DAMAGE. The driver should STOP and recalculate the approach.

Whilst activated and the vehicle speed increases above 10 Mph, the system is deactivated. There is No audible tone. The system flashes the GREEN light twice on the display to indicate that the system is in STANDBY.

If the vehicle is stationary, the system will continue to be activated until the hand brake is engaged (optional). This will give a DOUBLE flash of the GREEN light on the display to notify the driver that the system is in STANDBY.

Sensor Detection and Warning System

 Wiring Diagram

Sensor Options

Sensor Installation