The Ghost is the original aftermarket CAN bus immobiliser. Protect your car from theft like nothing else on the market today.
Click here for to check compatibilityÂ
The Ghost protects your car from key-cloning, hacking, and even key theft. The Ghost has no key-fobs or LED indications to give away its location. The Ghost uses the buttons in your vehicle such as those on the steering wheel, door panels or centre console, to allow you to make a unique, changeable, disarm sequence (like a PIN code) that must first be entered before you can drive your car. Just like your credit card but you can make your car disarm sequence even safer by making it up to 20 presses long!
In order to make extreme security also be hassle free, we have created a smart-phone application that connects to your car and allows you to get in and drive without having to enter the disarm sequence. This Ghost-II allows 2 phones to be connected. All you have to do is pair your phone with your Ghost-II, leave the Autowatch Ghost-II application running in the background with Bluetooth enabled and you can drive conveniently and securely. However, remember that if you phone is in range (5m to 10m) and the application is running the Ghost-II will be disarmed.
The new Autowatch AW780 transponder based system requires no conscious effort by the driver to operate the system . It works exactly as the factory fitted transponder immobilisers. The only difference is that the transponders are supplied separately and are not integrated into the vehicles ignition key. Other advantages are there are no batteries to go flat or receptacles to be damaged.Â
Features
- Coded Transponders
- Backward compatible with old 171 transponders
- Pin-code override
- On-board Immobilisation
- Ignition Anti-Hot wire
- Ideal for light plant equipment/older or imported cars
The Autowatch 173PPi transponder based system requires no conscious effort by the driver to operate the system . It works exactly as the factory fitted transponder immobilisers. The only difference is that the transponders are supplied separately and are not integrated into the vehicles ignition key. Other advantages are there are no batteries to go flat or receptacles to be damaged.
Features
- Coded Transponders
- Pin-code override
- On-board Immobilisation
- Circuit 3 Immobilisation (optional)
- Ignition Anti-Hot wire
- Ideal for heavy plant equipment/HGVs
The Autowatch 443Ti requires a unique touchkey to be pressed into the flush mounted receptacle. Simply press the touchkey to the receptacle and you have 30 seconds to start the vehicle. There is no procedure to rearm as the 443Ti will automatically rearms 30 seconds after the ignition is switched off. An optional hidden switch can be installed for maximum security. With the extra hidden switch installed both the touchkey and the hidden switch must be activated before the 443Ti will disarm.
Features
- Coded Touchkeys (up to 4)
- Automatic passive rearming
- Unique PIN override for emergency
- Service/valet mode
- On-board Immobilisation
- Circuit 3 Immobilisation
- Optional 2 factor authentication hidden switch for high security